Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
1. Introduction
Ever missed an important delivery or worried about who’s at your door? The Ring Video Doorbell 4 solves that problem, but only if you install it right. Attention to detail matters here — because a smooth setup means clear video, reliable alerts, and peace of mind. Installing it isn’t complicated, but there are a few tricks to get it right the first time.
In this blog post, I’ll walk you step by step through how to install Ring Video Doorbell 4 — no tech jargon, just a simple guide. The truth is, anyone can do it in under 30 minutes with the right guide. (Action) That’s exactly what this blog post will walk you through: a simple, step-by-step process on how to install Ring Video Doorbell 4 without stress.
TL;DR
- Learn how to install Ring Video Doorbell 4 easily
- Covers battery and wired setup
- Step-by-step, beginner-friendly guide
Tools and Materials You’ll Need
Before we jump into the actual steps, let’s make sure you have everything ready. The good news is that installing Ring Video Doorbell 4 doesn’t require many tools, and most of what you need comes in the box.
Basic tools:
- Screwdriver (usually provided)
- Drill (only if you’re mounting into brick, concrete, or stone)
- Level (to make sure the doorbell sits straight)
What comes in the Ring installation kit:
- Mounting bracket
- Screws and anchors
- Screwdriver tool
- Security screw
- Charging cable (for the battery)
Optional extras you might consider:
- Wedge kit: helps angle the doorbell if your doorway has a tricky view
- Corner kit: shifts the camera angle for better coverage
- Extra battery pack: if you want one charging while the other is in use
Having these tools ready will make the Ring Video Doorbell 4 installation smooth and quick.
Choosing the Right Installation Type
The Ring Video Doorbell 4 features two main ways to install it:
- Battery-powered installation
- Easiest method since you don’t need wiring
- Great if you don’t already have an existing doorbell
- Lets you place it almost anywhere near your door
- Hardwired installation
- Uses your home’s existing doorbell wires
- Keeps the battery charged at all times
- Best if you don’t want to worry about recharging
Which one should you choose?
- Go battery-powered if you rent, want flexibility, or don’t feel comfortable with wiring.
- Go hardwired if you own your home and want continuous power without needing to recharge the battery.
Preparing for Installation
Before actually mounting the doorbell, a little prep work helps avoid problems later.
- Charge the battery
- Plug it in using the provided charging cable.
- A full charge usually takes 6–8 hours.
- Download and set up the Ring app
- Available for iOS and Android.
- Create an account if you don’t have one.
- This is where you’ll connect and control your doorbell.
- Check your Wi-Fi signal
- The Ring Video Doorbell 4 needs a strong signal for smooth video.
- Test your Wi-Fi near the front door. If it’s weak, consider a Wi-Fi extender.
- Safety first (if wiring)
- Switch off power at the breaker before touching wires.
- Use a tester to double-check no current is running.
Doing these steps upfront ensures your ring video doorbell 4 installation goes smoothly.
Step-by-Step Installation Guide
A. Battery-Powered Installation
- Attach the mounting bracket
- Hold it where you want the doorbell.
- Use screws to secure it (anchors if you’re drilling into stone or brick).
- Align and secure the doorbell
- Slide the Ring Video Doorbell 4 onto the bracket until it clicks.
- Insert and secure the battery
- Slide the fully charged battery into the slot until it clicks in place.
- Connect to Wi-Fi via the app
- Open the Ring app and follow the prompts.
- Scan the QR code on the device to link it.
B. Hardwired Installation
- Turn off power supply
- Always flip the breaker off first for safety.
- Connect wires to Ring doorbell
- Attach your home’s existing wires to the terminals on the back of the device.
- Secure mounting bracket and device
- Mount the bracket, then slide the doorbell into place.
- Turn power back on and test device
- Flip the breaker back on.
- The Ring should light up, ready for app setup.
Configuring the Ring Video Doorbell 4 in the App
Once it’s mounted, the fun part is setting it up inside the app.
- App setup walkthrough: Open the app, select “Set Up a Device,” and scan the QR code.
- Connecting to Wi-Fi: Follow prompts to choose your home network.
- Customizing motion detection zones: Adjust areas so you don’t get false alerts (like passing cars).
- Adjusting video and notification settings: Change resolution, sensitivity, and when alerts are sent.
This is where you really start to enjoy the Ring Video Doorbell 4 features—you can fine-tune everything to fit your home.
Common Installation Mistakes to Avoid
Even though installing Ring Video Doorbell 4 is simple, here are mistakes people often make:
- Mounting too low or high – Ideal height is about 48 inches from the ground.
- Poor Wi-Fi placement – Weak signal causes lagging video.
- Skipping battery charge before setup – Causes early frustration.
- Not testing motion zones – Leads to unnecessary notifications.
Avoiding these mistakes saves time and keeps your ring video doorbell 4 installation stress-free.
Troubleshooting Installation Issues
Sometimes things don’t work perfectly the first time. Here’s what to check:
- Device not connecting to Wi-Fi: Move router closer or use an extender.
- Video feed not working: Check battery or wiring connection.
- No power (hardwired setup): Make sure breaker is on and wires are secure.
- App not recognizing the device: Restart the app or reset the doorbell and try again.
Most issues resolve quickly with these steps.
Final Testing and Optimization
Before you call it done, make sure everything works properly.
- Test the video quality and angle – Adjust if the view is off.
- Check two-way audio function – Say something through the app and make sure it’s clear.
- Run motion detection test – Walk in front of it to check sensitivity.
- Confirm notifications are working – Make sure your phone alerts you right away.
This ensures your Ring Video Doorbell 4 is ready to go from day one.
Conclusion
You’ve just completed your ring video doorbell 4 installation—congratulations! Whether you chose the battery-powered option or went with a hardwired setup, you now have a powerful device guarding your home.
To recap:
- Gather your tools and kit
- Decide on battery or wired installation
- Prep your device and Wi-Fi
- Follow the step-by-step guide
- Configure everything in the app
- Avoid mistakes and troubleshoot if needed
- Run final tests to confirm it all works
Once you’ve done these steps, you can enjoy the full Ring Video Doorbell 4 features, from crisp HD video to smart motion alerts. And don’t stop here—explore advanced settings in the app to get the most out of your new doorbell.
To recap:
- Gather your tools and kit
- Decide on battery or wired installation
- Prep your device and Wi-Fi
- Follow the step-by-step guide
- Configure everything in the app
- Avoid mistakes and troubleshoot if needed
- Run final tests to confirm it all works
